EBMX 74V 44Ah Removable Battery for Talaria XXX/Pro – 30kW Peak Power

EBMX 74V 44Ah Battery for Talaria XXX: The Ultimate Aftermarket Power Upgrade

The EBMX 74V 44Ah Battery for Talaria XXX is engineered for serious riders who’ve outgrown their OEM electronics and want race-grade power without the limitations of a stock setup. Compatible with the Talaria XXX, Talaria X3, Talaria XXX Pro, and Talaria X3 Pro, this pack pushes a fully charged peak voltage of 86V, industry-leading 3024Wh capacity, and a brutal 400A BMS — the highest-spec removable battery currently available for the Talaria platform.

Why the EBMX 74V 44Ah Battery for Talaria XXX Is Different

Most aftermarket Talaria battery upgrades simply pack more cells into a bigger case. EBMX took a fundamentally different engineering approach. Each NMC pouch cell is fully potted inside a stainless steel housing, drastically reducing the number of internal solder joints — the single biggest failure point on most high-discharge lithium packs. The result is a battery that can sustain 16kW of continuous power output and hit a 30kW peak for 15 seconds without sagging, overheating, or shutting down mid-ride.

The outer case is CNC-machined from a single billet of aluminium, sealed to IP67 standards, and engineered to drop straight into the Talaria XXX battery bay (and the XXX Pro, X3, and X3 Pro) with no frame modifications.

Key Features of the EBMX 74V 44Ah Battery for Talaria XXX

• 74V nominal / 86V fully charged — Higher-voltage architecture unlocks significantly more wheel torque than stock 60V systems.
• 44Ah capacity / 3024Wh — Roughly 2x the energy of the OEM Talaria pack, dramatically extending range per charge.
• 16kW continuous, 30kW peak (15s) — Race-spec power delivery for full-send riding sessions.
• 400A BMS — Active cell balancing, overcurrent protection, temperature monitoring, and short-circuit cutoff.
• NMC pouch cells, fully potted in stainless steel — Higher power density, fewer failure points, longer service life.
• Billet aluminium outer case — CNC-machined, weatherproof, and aesthetically clean.
• IP67 waterproof rating — Fully sealed against dust ingress and submersion up to 1 meter.
• QS8 connector + plug-in mounting — Tool-free battery swaps between sessions or for safe indoor charging.
• Safe operating window: 55V–86V — Maximizes usable energy while protecting cell health.
• Weight: 17.5kg — Heavier than OEM but offset by 2x capacity and structural reinforcement.

Performance Specs at a Glance

Critical Compatibility Note

This battery will not function with the OEM Talaria controller. The 74V architecture and high discharge rate exceed what the factory electronics on the Talaria XXX, XXX Pro, X3, and X3 Pro are designed to handle. To run the EBMX 74V 44Ah Battery for Talaria XXX, you must also install the EBMX X-9000 controller, which is purpose-built around this battery’s voltage and current profile and includes EBMX’s updated performance tune. Trying to pair this pack with stock electronics will at best trigger a fault, at worst damage your controller.

Who Should Buy the EBMX 74V 44Ah Battery for Talaria XXX?

This upgrade is built for experienced Talaria riders who:

• Compete in enduro, motocross, or hill-climb events and need consistent power delivery
• Want longer ride sessions without mid-ride recharges
• Are running or planning to install the EBMX X-9000 controller for a full powertrain upgrade
• Need a reliable replacement for an aging or damaged OEM Talaria XXX or X3 pack
• Demand professional-grade build quality (potted cells, billet case, IP67) over cheaper alternatives

It is not the right product for beginner riders, anyone planning to retain the OEM controller, or daily commuters who don’t need 30kW peak power.

What’s in the Box

The EBMX 74V 44Ah battery pack with billet aluminium case, sealed BMS, and QS8 plug-in connector harness. Charger included in some bundle variants — check listing options. Full installation guide and one-year manufacturer warranty.

FAQS

• Does the EBMX 74V 44Ah Battery fit the Talaria XXX, XXX Pro, X3, and X3 Pro? — Yes. The EBMX 74V 44Ah Battery for Talaria XXX is fully compatible with the Talaria XXX, Talaria XXX Pro, Talaria X3, and Talaria X3 Pro (internal codes TL2500, TL25, and X3 MX). It drops into the OEM battery bay without frame modifications when paired with the EBMX X-9000 controller.
• Is the EBMX 74V 44Ah Battery compatible with the stock Talaria controller? — No. The 74V output and 30kW peak power exceed what the factory Talaria XXX or X3 controller can handle. You must install the EBMX X-9000 controller to safely use this battery. Pairing it with the OEM controller will trigger faults or damage components.
• How much range does the EBMX 74V 44Ah Battery deliver on a Talaria XXX? — With 3024Wh of usable energy, this battery roughly doubles the range of the stock Talaria XXX or X3 pack. Real-world range depends on riding style, terrain, and rider weight, but most riders report 40–60+ miles of mixed riding versus 25–30 miles on the OEM battery.
• What is the peak power output of the EBMX 74V 44Ah Battery? — The battery delivers 16kW continuous power and a peak of 30kW for 15 seconds. The 400A BMS allows sustained high-current discharge without thermal throttling, making it ideal for racing, hill climbs, and aggressive off-road riding on the Talaria XXX, X3, and Pro models.
• Is the EBMX 74V 44Ah Battery waterproof? — Yes. The battery carries an IP67 rating, meaning it is fully sealed against dust and can withstand temporary submersion in up to 1 meter of water. The CNC-machined billet aluminium case and potted NMC pouch cells protect against moisture ingress in any riding conditions.
• What warranty comes with the EBMX 74V 44Ah Battery for Talaria XXX? — EBMX provides a 1-year manufacturer warranty covering defects in materials and workmanship. The warranty is void if the battery is used with non-EBMX controllers (such as the OEM Talaria controller), modified, or operated outside specified voltage and temperature ranges.